Disc Springs Home壹心娱乐.壹心娱乐官网

Valley Springs Home Contact Valley Springs About Valley Springs Location of Valley Springs Supplying the UK

Valley Springs Chesterfield Derbyshire壹心壹加娱乐官网

Disc Springs: Characteristics

Disc Spring Definition

Disc Spring Characteristics

Disc Springs to DIN 2093

Stainless Steel Disc Springs

Pre-Load Disc Springs

Belleville Washers

Serrated Safety Washers

Enquiry Form



The example illustrated above is typical of most disc springs, and underlines the necessity of limiting maximum deflection to 75% to avoid sharply increasing force and stress characteristics.

As the compressed disc spring nears its 'flattened' condition, the reducing cone angle results in the movement of bearing point toward the centre, thus effectively shortening the 'lever' length and 'stiffening' the spring.


The ability to change the force/deflection characteristic, by way of varying the cone height to thickness ratio, is a particularly useful feature of the disc spring.

Shown above are some examples of different cone height to thickness ratios, and up to a ratio of 1.5 the disc springs may safely be taken to 'flat' or stacked in columns.

Above ratio 1.5 the disc spring will adopt a regressive characteristic, and is capable of 'push-thro.' if not fully supported. Disc springs with cone height/thickness ratios above 2.0 may invert when compressed toward the 'flat' condition.

Thank you for visiting our site. Do you require further information?

Valley Spring Co Ltd
Pottery Lane East
Chesterfield, Derbyshire
United Kingdom S41 9BH

Valley Spring Company: Chesterfield Derbyshire

Tel: +44 (0)1246 451981
Fax: +44 (0)1246 454327

Home | Compression Springs | Extension Springs | Torsion Springs | Die Springs | Disc Springs | Belleville Washers | Flat Rack Containers | About Us | Location | Contact Us ]